LS-125 Double station punching machine 

I. Main technical specification

    The machine is applicable to material like plastic, leather, plastic foam material, paperboard, flooring, textile, fiberglass and cork, suitable for cutting kinds of sheet, vacuum packing with single or full mould. Especially for large area, it can provide good cutting accuracy, high tonnage cutting force output, suitable for punching single layer or multi-layers blanking.

II. Components of machine

1. Upper mould plate          1pcs

2. Lower mould plate         1pcs

3. Machine frame               1pcs

4. Guide pillar                    4pcs

5. Beam                          2pcs

6. Hydraulic system           1pcs

7. Operation control box   1pcs

8. Conveying plate           2pcs

9. Conveying oil cylinder   2pcs (if need 2servo motors for more exactly feeding, price must 20thousand more)

10. Punching oil cylinder   2pcs 

III. Main configuration

1. Computer control system and touch screen,make the operation easy, quick and accurate.

2. Double oil cylinders, with four precise pillars balancing, ensure the same cutting depth of each cutting place

3. Hydraulic punching uses hands operation, just button one time without press times. Also have emergency stop button to ensure safe operation.

4. Differential action design, rapid down to mould and then automatic slow cutting, cutting size both upper and lower sheet is the same

5. Punching material like PET/OPS/EPE/ABS and other environmental materials won’t be cutting edge or burrs. When cutting food-box can prevent cutting powder sticks on the box.

6. Punching force with fine turning, can rapidly adjust to the best punching pressure. Because precious punching balance to greatly reduce the loss of mould and cutting board.

7. Automatic lubrication can ensure the precision and enhance machine durability.

8.  Especially a device for cooling and rotary encoder, making it more accurate and stable location.

9.  Can work with single or bilateral automatic controlling feeding device,  to improve two to three times production efficiency

10. PLC controlling, operating on the man-machine interface, convenient and practical.

11. With the anti-noise technology to reduce the noise of running machine

12. Automatic lubrication system inside, to ensure the precision and durability of machine

13. Punching depth inputs with digital

Model	LS-125
Punching pressure	125ton
Punching size(mm)	1250 X800
Inside area(mm)	1500 X800
Running range(mm)	220
Main motor	7.5Kw（Bader/Siemens）
Net weight	About 5200Kg
Voltage	380V，50Hz,3phase4lines
Total weight	5500KG
Dimension	4500X1850X1700mm
Working efficiency	5-14times/min